top of page
Writer's pictureDIYTechnician

DIY TV Mounts. Which Television Mount is Best for You?


You may be asking yourself "How do I mount my TV to the wall" or "How do I install my television to the wall". Watch my instructional "DIY How to Mount a Television to the Wall for Fixed Position Wall Mount | Step by Step Tutorial" to see how I did it. It's always good if you can sink these into the wall studs or at least land on one of the studs if possible. I'd also recommend threaded drywall screws for mounting into drywall as they seem to hold quite a bit better than the ones that are just pushed in. If you can, seek some assistance for an extra set of hands as it makes go a little easier. I did this install all by myself but another person can help holding things while they get templated if necessary. The wall mounts are very nice to have and are great space savers.


Here's a link (paid link) to a television wall mounting system.

Mounting Dream UL Listed TV Mount for Most 37-70 Inches TVs, Universal Tilt TV Wall Mount Fits 16", 18", 24" Studs with Loading 132 lbs & Max VESA 600x400mm,Low Profile Wall Mount Bracket MD2268-LK: https://amzn.to/3udla0P


Television Wall Mount Installation Basic Tutorial

n this "DIY Television Wall Mount Installation Basic Tutorial [DIY TV Wall Mount Installation Kit Demo]" video I demonstrate how to take a TV from it's OEM (original equipment manufacturer) brackets that came with the TV to a nice out-of-the-way wall mount.


Here's a paid amazon link to one:

Full Motion TV Wall Mount with Height Setting, JUSTSTONE TV Bracket Fits Most 27-65 Inch LED Flat&Curved TVs,Articulating Swivel Tilt Dual Arms Extension Max VESA 400x400mm and Holds up to 121 LBS:


DIY HANG ONN BRAND TELEVISION WALL MOUNT TUTORIAL DEMONSTRATION


Hi everyone! My "DIY HANG ONN BRAND TELEVISION WALL MOUNT TUTORIAL DEMONSTRATION [HANGONN TV WALL MOUNT]" video is on how to install this tilting tv wall mount from hangonn brand. You need a screwdriver, tape measure, hammer, drill, stud finder, socket set, and a level. Here's what comes in the box's quick start guide direction template. It's got a hanging template for marking on the wall properly. Great idea.

How To Set Up Your LG (Life's Good) Brand Television

This TV has been good so far. Had it for quite some time since making this post. I ended up wall mounting it later on down the road but this one came with some plastic leg pieces out of the box. This was really easy to set up and operate. Sorry for not talking on this, was trying to be quiet for someone taking a nap. If you are thinking about getting one of these, I would recommend it.


Get yours here:

(Paid) Amazon link:


Custom Welding Project | All Welded TV Stand | Start to Finish Fabrication


With just a little bit of know how, some tooling and cheap machinery, you can fabricate this all Welded TV Stand.


Step by step instructions with pictures at my website here:


Here's a paid link to a Lincoln PROMIG wire feed welder.

Lincoln Power MIG 140MP MIG Welder K4498-1:


SAMSUNG Television Wall Mount Basic Tutorial Demonstration For Dummies

This SAMSUNG TV wall mount was really easy to do. I used threaded dry wall anchors as I like these the absolute best. I used a level and a marking stick to get the mounting foundation level so the TV will sit nice and straight on the wall.Once you get the frame mounted into the wall and it's nice and secure, it's time to hand the TV. These things are actually really user friendly to put up. If you have a stud finder that would sure help out. I'll post a link to one down below as well as a link to these anchors that I firmly believe in compared to other types. The top of the tv snaps onto the first and then the bottom latches in. The mounting fixture comes with two quick release cords for removing the TV. This makes it nice because the TV is nice and locked into the frame so it won't readily fall out. Once the bottom is snapped in then it's time to hook up all your cables and now you are good to go.


Here's a couple paid amazon links to the products I mention above:

Stud Finder Sensor Wall Scanner - 5 in 1 Electronic Stud Sensor Locator Wood Beam Joist Finders Wall Detector Edge Center Finding with LCD Display for Wood Live AC Wire Metal Studs Detection (Silver):


ITW Brands 25310 50 pack 75lb Drywall Anchor:


FITUEYS Universal TV Stand Assembly-Basic Instructional DIY demonstration and directions


This is the best TV stand ever. Heavy duty and very easy to assemble. Highly recommend it.


Here's a paid amazon link to it:









Comentarios


bottom of page